NSW2000-24T2GC-POE

Ports

24×10/100Base-TX autosensing Ethernet ports(all support PoE)

2×Gigabit combo ports (RJ45 and SFP)

Port attribute

10/100/1000Mbit/s transfer rate

Half-duplex, full-duplex and auto-negotiation

Auto MDI/MDIX

Standards

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3z 1000BASE-X

ANSI/IEEE 802.3 NWay

IEEE 802.3x flow control

IEEE 802.3af and IEEE 802.3at PoE

PoE

MAC

4K

Packet forwarding rate

6.55Mpps

Switching capacity

8.8Gbps

EXTEND mode

Disabled: all ports can communicate with each other, and monitoring optimization is disabled.

Enabled: downlink ports can only communicate with uplink ports; monitoring optimization is enabled, and transmission distance can be extended to up to 250 meters.

Status LEDs

Link/Act (steady green): link is normal

Link/Act (flashing green): data is being forwarded

Link/Act (off): no link

PoE (steady orange): the port is powering a powered device properly

PoE (off): the port is not connected to any powered device or is not supplying power

Power (steady green): AC input is normal

Power (off): AC input is abnormal

PoE

802.3at/af

Max PoE capacity: 400 W

Consumption

≤ 450 W

AC voltage

100-240 V

Operating temperature

0°C-40°C (32°F-104°F)

Operating humidity

10%-85%

Storage temperature

-10°C-70°C (14°F-158°F)

Storage humidity

10%-90%

Dimensions (W×D×H)

440mm×280mm×44mm (17.3″×11″×1.7″)